Products

Clear High Temperature Fiberglass REFLOW Carrier (亮面耐高溫玻纖板REFLOW載具)

Clear High Temperature Fiberglass REFLOW Carrier (亮面耐高溫玻纖板REFLOW載具)

It is usually used in SMT process.  During mass production, temperature loss from solder stove is less, comparing to aluminum-made Carrier. High temperature fiberglass plate (clear) will help for sensor reading.  It is more sensitive than black & blue synthetic stone.  However, for the old sensing equipment,it cannot be fully sensed.  According to past experience,  gray synthetic stone is currently the first choice to overcome sensor reading problem.  However, its price is too high to be accepted.  So, for the old machine which has poor sensor reading, it can use sticky tape or spray heat gray paint to increase the efficiency of sensor reading.   It is economical and prompt solution.


常用於SMT製程,於量產過程中,錫爐失溫狀況比鋁製品的少.耐高溫玻纖板(亮面)有助於感應器讀取; 比起一般黑色,藍色合成石靈敏一些. 不過對於老舊感應設備,依然無法完全被感應. 依經驗值分析,目前唯一可以應付光感應問題的材質; 還是首推灰色合成石;只是價格常另客戶端怯步. 一般解決方式,對於感應不良的設備, 採用貼膠帶或噴耐熱灰色漆,以增加光感效果. 這是最經濟實惠又快速的方法,提供參考使用.